Durk Thanks for the information, I've been playing around and got a 180 degree curved pushback (with a nice pirouette in the middle).
Roland Häder has generously offered to host my ground network files on his site for those who don't like Mediafire, they can be found here: http://flightgear.mxchange.org/bharrison/groundnet/groundnet-1.zip Many thanks Brett (Who is now off to find some more airports) Durk Talsma wrote: > Hi Brett, > > On Monday 02 June 2008 21:16, Brett Harrison wrote: > >> Runway holding point I'm OK with. >> >> I take it pushback would go something like this. >> >> startup location ----> pushback route ----> pushback holding point -- >> then onto the main network. >> > > Exactly. Note that you can also do: Startup location -> pushback route -> > regular node -> pushback route -> pushback hold point. > > > >> So no need for "on runway" points yet, I can always redo them later. >> > > Hopefully, future versions of Taxidraw will be able to set these > automatically. We have the geometry data of the runways available. Then, it > should be a matter of loading the ground networks and run them through the > verification tools. > > Cheers, > Durk > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Flightgear-users mailing list > Flightgear-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/flightgear-users > > > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Flightgear-users mailing list Flightgear-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-users
