Hi, I saw in the archives that someone asked how to start Flightgear with the aircraft in the air and stable but didn't see any responses. I am trying to do the same thing for practicing instrument approaches and running into problems. Specifically I'm trying to fly the LOC/DME 31 approach for Salinas (KSNS) and using the following command line:
./fgfs --enable-fullscreen --timeofday=morning --airport=ksns --offset-distance=25 --offset-azimuth=107 --heading=297 --altitude=6000 --vc=110 --nav1=311:108.5 --nav2=297:117.3 --dme=nav2 --ceiling=800 It puts me in the right position however the attitude indicator shows a left bank of about 20 degrees even though the turn coordinator and heading indicator show wings level flight. I can't get the AI to work even if I fail it and unfail it in the Equipment menu. Suggestions? Also is there any way to specify a starting location relative to a VOR or a fix? I tried using the --vor and --fix command line options but they seemed to be ignored and flightgear took the offset-distance and offset-azimuth relative to KHAF instead of the VOR/fix I wanted. This is flightear 1.0 on linux Thanks! Ben ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Flightgear-users mailing list Flightgear-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-users
