I will say so far nothing has helped. I have install freeglut replacing openSuSE's version. I have checked all "ccmake . <t>" for any thing dealing with GL and the library is found. But one thing is not found "opengl-eml" as I remember. What is the "eml" part of openGL?
On 05/15/2010 09:26 PM, Curtis Olson wrote: > This really sounds like a system setup issue (i.e. your opengl / > graphics drivers) and not a flightgear compilation issue. Can you run > any other opengl programs on your system? > > Curt. > > > On Sat, May 15, 2010 at 7:57 PM, Donn Washburn <n5...@comcast.net > <mailto:n5...@comcast.net>> wrote: > > On 05/15/2010 06:11 PM, Sid Boyce wrote: > > On 15/05/10 15:30, Tarot wrote: > > > >> try to use glut . There are many progblem with freeglut > >> > >> > > I have the same problem as Donn reported. > > Using NVidia driver 195.36.24. > > # rpmbuild --rebuild glut-3.7-17.src.rpm > > Installing glut-3.7-17.src.rpm > > error: Failed build dependencies: > > OpenGL-devel is needed by glut-3.7-17.x86_64 > > Seems we'd have to mess with other stuff. > > Everything used to work with freeglut from the openSUSE > distribution. > > What are the current problems with it? > > # l /usr/lib64/libGL* > > lrwxrwxrwx 1 root root 22 2010-05-12 15:13 > > /usr/lib64/libGLcore.so.1 -> libGLcore.so.195.36.24* > > -rwxr-xr-x 1 root root 28860472 2010-05-12 15:13 > > /usr/lib64/libGLcore.so.195.36.24* > > lrwxrwxrwx 1 root root 16 2009-11-03 20:04 > /usr/lib64/libGLEW.so > > -> libGLEW.so.1.5.1* > > lrwxrwxrwx 1 root root 16 2009-11-26 15:43 > > /usr/lib64/libGLEW.so.1.5 -> libGLEW.so.1.5.1* > > -rwxr-xr-x 1 root root 321704 2009-10-19 20:30 > > /usr/lib64/libGLEW.so.1.5.1* > > -rw-r--r-- 1 root root 661 2010-05-12 15:13 /usr/lib64/libGL.la > > lrwxrwxrwx 1 root root 10 2010-05-12 15:13 > /usr/lib64/libGL.so -> > > libGL.so.1* > > lrwxrwxrwx 1 root root 18 2010-05-12 15:13 > /usr/lib64/libGL.so.1 > > -> libGL.so.195.36.24* > > -rwxr-xr-x 1 root root 957760 2010-05-12 15:13 > > /usr/lib64/libGL.so.195.36.24* > > lrwxrwxrwx 1 root root 11 2010-05-02 00:34 > /usr/lib64/libGLU.so -> > > libGLU.so.1* > > lrwxrwxrwx 1 root root 20 2010-05-02 00:17 > /usr/lib64/libGLU.so.1 > > -> libGLU.so.1.3.070801* > > -rwxr-xr-x 1 root root 453416 2010-04-29 21:30 > > /usr/lib64/libGLU.so.1.3.070801* > > lrwxrwxrwx 1 root root 11 2009-11-03 20:04 > /usr/lib64/libGLw.so -> > > libGLw.so.1* > > lrwxrwxrwx 1 root root 15 2009-11-03 20:04 > /usr/lib64/libGLw.so.1 > > -> libGLw.so.1.0.0* > > -rwxr-xr-x 1 root root 26872 2009-10-19 20:31 > /usr/lib64/libGLw.so.1.0.0* > > > > slipstream:/home/lancelot/ftp/Apr10 # rpm -q freeglut > > freeglut-090301-7.4.x86_64 > > Regards > > Sid. > > > > > >> On 05/15/2010 02:43 PM, Donn Washburn wrote: > >> > >>> On 05/14/2010 10:25 PM, Curtis Olson wrote: > >>> > >>> > >>>> On Fri, May 14, 2010 at 7:37 PM, Donn > Washburn<n5...@comcast.net <mailto:n5...@comcast.net> > >>>> <mailto:n5...@comcast.net <mailto:n5...@comcast.net>>> wrote: > >>>> > >>>> Hey Group; > >>>> I downloaded about everything that was available for > flightgears. > >>>> All seemed to compile via make or cmake OK. > >>>> I installed all kinds of things like plib, freeglut, > Simgrear and OSG > >>>> What does this error mean. (must go now lightening > very close) > >>>> ~> fgfs > >>>> Error: Unable to create OpenGL graphics context. > >>>> Error: Unable to create OpenGL graphics context. > >>>> Segmentation fault > >>>> > >>>> > >>>> Typically this error would indicate a failing or deficiency > in your > >>>> opengl drivers. I run nvidia graphics hardware exclusively under > >>>> linux and I always go to nvidia.com > <http://nvidia.com><http://nvidia.com> and download > >>>> and install their latest drivers. If you have some other > graphics > >>>> chipset, then your mileage may vary. You might want to try > installing > >>>> some other opengl based applications and test to see if they > work ok. > >>>> > >>>> Regards, > >>>> > >>>> Curt. > >>>> > >>>> > >>> Same thing here. In openSuSE 11.3 M6 I got > >>> NVIDIA-Linux-x86-195.36.07.04-pkg1.run and/or > >>> NVIDIA-Linux-x86-195.36.15-pkg1.run to work correctly (at least it > >>> appears) by anding to /etc/X11/init.d/xserverrc --ignoreABI. > It is a > >>> problem caused by xorg (I think). It compiles correctly > installs the > >>> module and no place to add nvidia. Ther is no /etc/X11/xorg.conf. > >>> > > > Sid; > > I am recompiling all of the Flightgear software that I have done > before > to get Flightgear up. All of it is SVN/CVS not openSuSE's rpms. > So far > nothing has fixed the problem. I am wondering if it is a xorg or > KDE4. > I don't think it is a NVidia.run problem. They have all worked > before. > I will say two days ago the SVN or CVS to Simgear and Flightgear was > down also. > -- 73 de Donn Washburn 307 Savoy Street Email:" n5...@comcast.net " Sugar Land, TX 77478 LL# 1.281.242.3256 Ham Callsign N5XWB HAMs : " n5...@arrl.net " VoIP via Gizmo: bmw_87kbike / via Skype: n5xwbg BMW MOA #: 4146 - Ambassador " http://counter.li.org " #279316 ------------------------------------------------------------------------------ _______________________________________________ Flightgear-users mailing list Flightgear-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-users
