Ahhh. (I had looked all over and couldn't find it.) Yes - you can ignore it; that is a static remnant from our system which is on the US East Coast. I'll fix that. The times shown are all system Local.
Joe
| "Samson Martinez" <samson @motive.com> 02/02/2006 04:53 PM |
To: Joe Loiacono/CIV/[EMAIL PROTECTED] cc: <[email protected]>, <[EMAIL PROTECTED]> Subject: RE: [Flow-tools] FlowViewer Timestamp |
Joe,
The last report I ran was FlowViewer Source/Destination IP and I get something like this:
Report Parameters:
Report: Source/Destination
IP
Device:
Sort Field: 4
Lines Cutoff: 100
Octets Cutoff:
Protocols:
Start (ET): February 1, 2006
19:00:00 End (ET):
February 1, 2006 21:00:00
Source:
Destination:
Source Port:
Destination Port:
Source I/F:
Destination I/F:
Source AS:
Destination AS:
TOS Field:
TCP Flag:
The same happens with FlowGrapher. Can I basically ignore the “(ET)” in the response?
-Samson
From: Joe Loiacono [mailto:[EMAIL PROTECTED]
Sent: Thursday, February 02, 2006 2:40 PM
To: Samson Martinez
Cc: [email protected]; [EMAIL PROTECTED]
Subject: Re: [Flow-tools] FlowViewer Timestamp
Samson,
FlowViewer and FlowGrapher *should* be doing everything off of local system
time. Can you tell me which report you are running?
Thanks,
Joe
| "Samson Martinez"
<samson @motive.com> Sent by: flow-tools-bounces 02/02/2006 12:43 PM | To: <[email protected]> cc: Subject: [Flow-tools] FlowViewer Timestamp |
Hello all,
My current deployment of FlowViewer reports EST in the timestamp – how can I get that to report CST?
Thanks!
-Samson
_______________________________________________
Flow-tools mailing list
[EMAIL PROTECTED]
http://mailman.splintered.net/mailman/listinfo/flow-tools
_______________________________________________ Flow-tools mailing list [EMAIL PROTECTED] http://mailman.splintered.net/mailman/listinfo/flow-tools
