Hello all, I am trying to setup a NetFlow product on our 6509. We have a number of different VLAN's across our network and I think I would want to monitor those VLAN's and that should capture the traffic on the 6509 (correct me if I am wrong.) The way the product is licensed is by source (a source is a router or switch.) When I try to setup netflow each VLAN comes in as a different source and I would like it if I can use the 6509 as just once source. Here are the commands I am using to set this up. in configuration mode: ip flow-export source vlan10 ip flow-export version 5 ip flow-export destination 172.20.200.50 Now I configure netflow for switched traffic: mls nde sender version 5 mls flow ip interface-full mls nde interface On the interface (vlan 10): ip route-cache flow After doing that I see that incoming traffic is being monitored by NetFlow, however as said that interface (VLAN) is coming in as a source, so if I configure another VLAN I now have 2 sources, but I would like to set this up so the 6509 is just one source, monitoring all the VLAN's.
I wanted to know if these commands are correct, if I should be monitoring the VLAN's and if anyone knows how to set this up as explained above with the 6509 as one source. Thank you, Travis
_______________________________________________ Flow-tools mailing list [email protected] http://mailman.splintered.net/mailman/listinfo/flow-tools
