> Thanks for your support, m here trying to cross compile fltk > 1.1.9 for arm target board, finally m getting error is shown below > > /home/vinayak/arm-2007q1/bin/../lib/gcc/arm-none-linux-gnueabi /4.2.0/../../../../arm-none-linux-gnueabi/bin/ld: cannot find -lXext > collect2: ld returned 1 exit status > make[1]: *** [fluid] Error 1 > make: *** [all] Error 1
- You need to link against the cross-compiler target versions of libXext.a or libXext.so to resolve this error (as suggested yesterday.) I suggest that this is as simple as adding the correct paths to your linker command line to find this lib. - If you do not have libXext.* in your cross-compiler environment, then you will need to obtain it, as fltk/X11 will probably not work without it. - You need to post to fltk.general; this list [fltk.dev] is for development of the fltk library, not for development hat uses the fltk library. SELEX Sensors and Airborne Systems Limited Registered Office: Sigma House, Christopher Martin Road, Basildon, Essex SS14 3EL A company registered in England & Wales. Company no. 02426132 ******************************************************************** This email and any attachments are confidential to the intended recipient and may also be privileged. If you are not the intended recipient please delete it from your system and notify the sender. You should not copy it or use it for any purpose nor disclose or distribute its contents to any other person. ******************************************************************** _______________________________________________ fltk-dev mailing list [email protected] http://lists.easysw.com/mailman/listinfo/fltk-dev
