>
> > I have dump the raw data of my file, I have input 8 'a', the=20
> > dump data has the line of below:
> >=20
> > 00000f0 202c 3031 2c30 2220 6161 6161 6161 6161
> >=20
> > So I think the encoding should be right.
>
> Yes - that looks OK.
>
> Does your code run correctly on your other platforms, i.e. not on your
> arm target?
> What does it do on an x86 PC, for example?
>
> I strongly suspect there is something in the arm setup that is exposing
> this issue, so we need to see what happens on other systems for
> comparison.
>
>
>
> > Thanks for your help. I think I still need to use fltk-2.0.
>
> Well - best of luck with that.=20
> You will be pretty much on your own though, you need to be aware of
> that.
>
>
> > I still has one question, why the initialize speed of=20
> > fltk-1.3 is faster than fltk-2.0. The same example test=20
> > program, fltk-1.3 take about 0.7 second to display, but=20
> > fltk-2.0 need about 1.2 second. Someone in the Forum told me=20
> > it is because fltk-2.0 need to load lots fonts. But fltk-1.3=20
> > do not need load fonts?
>
> I *think* (and this is mainly a guess) that fltk-2 tries to enumerate
> installed fonts at startup, whereas fltk-1.x only enumerates the
> installed fonts when told to do so using the Fl::set_fonts("*") method
> (note that is set_fonts(...) *not* set_font(...) there!)
> You do not need to enumerate all the fonts to load them, you can just
> load individual fonts, of course.
>
>
>
> SELEX Galileo Ltd
> Registered Office: Sigma House, Christopher Martin Road, Basildon, Essex SS=
> 14 3EL
> A company registered in England & Wales. Company no. 02426132
> ********************************************************************
> This email and any attachments are confidential to the intended
> recipient and may also be privileged. If you are not the intended
> recipient please delete it from your system and notify the sender.
> You should not copy it or use it for any purpose nor disclose or
> distribute its contents to any other person.
> ********************************************************************
>
Dear Ian,
So how do I just load individual fonts in fltk-2.0? If I can do this, then I
can speed up the load time of applications. Many thanks for your help these
days.
_______________________________________________
fltk mailing list
[email protected]
http://lists.easysw.com/mailman/listinfo/fltk
