On Wed, 11 May 2005 12:02:36 -0600
Garett Shulman <[EMAIL PROTECTED]> wrote:
> Hey Dave, the 2496 hardware outs use sample rate of 48000. You need to
> either setup a plug device in asoundrc and point fluidsynth at that or
> point fluidsynth to plughw:0,0 instead of hw:0,0 (or whatever your card
> numbers are).
> HTH. -Garett
>
> Dave Serls wrote:
>
> >I'm trying to test my M-audio 2496 Audiophile with fluidsynth.
> >Other cards on this system (Mandrake 10.1, ALSA 1.0.8) work ok.
> >The M-Audio appears to want some other format -- I think I have it
> >set to 44100 .
> >
> >The error is:
> >fluidsynth: error: Failed to find a workable audio format
> >Failed to create the audio driver
> >
> >Do I need some plugin or .asoundrc entry??
> >Thanks for any assistance.
> >
> >
> >
>
>
Well, I'm trying something like that.
I've never seen any decent documentation on this and don't
know which end is input here.
Now I get 4 messages of "slave PCM not useable" using
pcm.ice1712 {
type hw
card 2
}
ctl.ice1712 {
type hw
card 2
}
pcm_slave.cnv {
pcm ice1712
format S24_LE
channels 2
rate 48000
}
pcm.fluid_convert {
type plug
slave cnv
}
Arrrgh.
--
************************************************************************
* Dave Serls Littleton, CO, USA *
* dashs.denver.co.us sorrybiscuit.com *
************************************************************************
_______________________________________________
fluid-dev mailing list
[email protected]
http://lists.nongnu.org/mailman/listinfo/fluid-dev
