Our new fan is up and running. This should make things a lot more
pleasant at shows especially for the performers because it's located in
the existing duct right above the stage.
A couple things to keep in mind when running it however.
When the thermostat is activated it takes several seconds from the time
the fan is powered on until it starts running. A red light on the
control box indicates it's got power. Be patient.
It is surprisingly quiet even at full power but speed can be adjusted on
the control box. Make sure it is running fast enough to keep the
outside shutters open.
Make sure the windows are open. It moves a lot of air and needs to
replace what it blows outside. If it can't do that, it's just spinning
in a vacuum and won't cool anything.
The electrical connection is just temporary because the control unit
needs to be plugged directly into an outlet. This is a design
shortfall. Plans are being made to install an outlet up under the fan.
Meanwhile make sure the power strip has a good connection to the wall
outlet.
_______________________________________________
Flying-squirrel-members mailing list
[email protected]
https://lists.mayfirst.org/mailman/listinfo/flying-squirrel-members
To unsubscribe, send an email to:
[email protected]
(The subject and body of the email don't matter)
