To create measures use the MeasureGenerator transformer which permits both 2d and 3d measurements.
To use existing measures change the 'treat measures as elevation' setting to yes and the measures will be read into the Z value (which you can then extract with a CoordinateFetcher if you need) Hope this helps, Mark Mark Ireland, Product Support Engineer Safe Software Inc. Surrey, BC, CANADA [EMAIL PROTECTED] http://www.safe.com Solutions for Spatial Data Translation, Distribution and Access -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of rg_dubbya Sent: July 14, 2005 9:50 AM To: [email protected] Subject: [fme] extract measured values from polyline m Hi everyone, I need to extract the measured values at various points along a polyline m (such as the point at which the line intersects an area boundary). The measures don't necessarily correlate to the planar distance (they could have elevation taken into account, etc.) so using the m values is a must. Is there a way to extract these measures, since using a length calculation won't really help? Thanks, rgd Get the maximum benefit from your FME, FME Objects, or SpatialDirect via our Professional Services team. Visit www.safe.com/services for details. Yahoo! Groups Links Get the maximum benefit from your FME, FME Objects, or SpatialDirect via our Professional Services team. Visit www.safe.com/services for details. Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/fme/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
