Thanks very much...
Now i understand "DXF group 370"., but when i am translating
small world data to autocad by "expose the format attribute
"autocad_lineweight" in the destination feature type definition", I
am not getting default "0" as line weight for all.
Would anyone know what is happening here ?
Thanks.
--- In [email protected], "Axel Axmann" <[EMAIL PROTECTED]> wrote:
> Hi Turandhar,
> First please note that you are writing to our office adress
> [EMAIL PROTECTED] . If you want to communicate through the FME group
> plese refer to http://groups.yahoo.com/group/fme/ by replying to
> this message.
>
> As for your question: DXF group 370 stores the entities lineweight.
>
> The page
>
http://www.autodesk.com/techpubs/autocad/acad2000/dxf/group_codes_in_n
> umerical_order_dxf_01.htm
> tells:
> 370-379
> Lineweight enum value (AcDb::LineWeight). Stored and moved around
as
> a short. Custom non-entity objects may use the full range, but
entity
> classes only use 371-379 DXF group codes in their representation,
> because AutoCAD and AutoLISP both always assume a 370 group code is
> the entity's lineweight. This allows 370 to behave like
> other "common" entity fields.
>
> Kind regards, Axel
> --- In [email protected], "Axel Axmann" <[EMAIL PROTECTED]> wrote:
> > Hi Turandhar,
> > To set the lineweight, you must expose the format attribute
> > "autocad_lineweight" in the destination feature type definition.
> Then you
> > will get an ACAD group 370 being filled with the value you direct
> into tis
> > additional attribute.
> >
> > Good luck,
> > Axel Axmann
> >
> > ++++++++++++++++++++++++++++++++++++++++
> > ....................... axmann
geoinformation .....................
> > ............................
> www.axmann.at ...........................
> > tel +43-2282-5000 ........................... [EMAIL PROTECTED]
> > fax +43-2282-5001 ......................... [EMAIL PROTECTED]
> > 2230 Gaenserndorf (Austria) ... Hans Kudlich-Gasse 11
> > ++++++++++++++++++++++++++++++++++++++++
> >
> > ----- Original Message -----
> > From: "turandhar81" <[EMAIL PROTECTED]>
> > To: <[email protected]>
> > Sent: Monday, August 01, 2005 8:16 AM
> > Subject: [fme] AutoCAD line weight
> >
> >
> > >
> > > Hi,
> > >
> > > I am exporting smallworld data in to autocad 2000, Please
> anybody
> > > tell me how to give line weight in autocad by using FMW file. I
> already
> > > tried autocad_lineweight command but it does not works.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Get the maximum benefit from your FME, FME Objects, or
> SpatialDirect via
> > our Professional Services team. Visit www.safe.com/services for
> details.
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
Get the maximum benefit from your FME, FME Objects, or SpatialDirect via our
Professional Services team. Visit www.safe.com/services for details.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/fme/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
