Hi All,
I have been processing DWG files that contain features with 3D coordinates
successfully using FME 2005.
However, after moving to FME 2006GB, it seems that if the Z coordinates of
a feature are set to 0.0, then FME assumes that the feature is only in 2D.
My original mapping files are using a 3DAffiner with success, but now with
2006GB, the features are ignored since FME thinks they are 2D.
This theory can be tested by reading the same DWG file into the different
versions of the Universal Viewer.
Can anyone suggest how to get around this problem?
Cheers...
Geoff Innes
Tel: + 61 2 9436 3820
Fax: + 61 2 9436 3780
Mob: 0402 259 523
Email: [EMAIL PROTECTED]
*******************************************************************************
Unless explicitly stated, the opinions expressed in this email are that
of the author.
*******************************************************************************
Join us at the FME Worldwide User Conference Sept. 21-22, 2006 Vancouver BC
Canada. For more information, visit www.safe.com/2006uc.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/fme/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
