I have an annotation layer originally from Autocad representing the Address Number of the buildings. There is no connection to the street, it is assumed via its proximitry and orientation (text is (approx) 90° to the street to which it belongs. My task - produce a list of street segments from my centerline layer within 150' of the address point. Since some addresses might be closer to streets other than their correct address, I would like to add the list of streetnames to an attribute using the ListConcatenator. Herein lies my problem...
1. I specify the insertion point of the text as the base and the centerline as the candidate in the NeighborFinder transformer. I enter 150 ft as the distance 2. I specify a Candidate List name of lstStreets, so I can get a list of all streets within 150' of my point 3. When I attach the ListConcatenator to the Matched port, no listnames appear in the dropdown for the list attribute. Why not? Is there a difference between the objects in the Candidate List vs the list attribute. BTW, my intention was to put the concatenated streetnames in a destination attribute called StreetList Any help will be appreciated. --Bill William G Voigt (415) 485-3366 voice GIS Analyst II (415) 485-3334 fax Dept Public Works 111 Morphew St City of San Rafael San Rafael, CA 94901
