> The first thing you need to do is upgrade your sensor to version 5.1 or
> 6.0.
> You have 4.1 software, which is no longer supported. If you have
> maintenance on your sensor, the upgrade is no charge. If you do not have
> maintenance (called Services for IPS), then you'll need to take care of
> that
> first.
>
Thanks Gary, yes I am aware of that.
> The 4215 sensor has only two interfaces, and you need one for command and
> control. This is the interface that you'll assign an IP address to and
> use
> for management purposes.
>
Yes you are right .
According to the specification in the table 5-2 (under IDS 4125, same as
mine) from the link that I have posted for IDS 4125 , FastEthernet 0/1
should be for sensing purposes,,,,,,,,,,my case since I am looking to
monitor a traffic in the DMZ area, I should use Etherent 1 (not 0) for
monitoring (sensing) , right now Ethernet 0 (not 1) was used, and I guess
this is wrong ,,,,,,here was my query ?
--
View this message in context:
http://www.nabble.com/IDS-4215%2C-right-place-for-a-sniffing-interface-%28DMZ-or-LAN%29-tf2718902.html#a9849238
Sent from the IDS (Intrusion Detection System) mailing list archive at
Nabble.com.
------------------------------------------------------------------------
Test Your IDS
Is your IDS deployed correctly?
Find out quickly and easily by testing it
with real-world attacks from CORE IMPACT.
Go to
http://www.coresecurity.com/index.php5?module=Form&action=impact&campaign=intro_sfw
to learn more.
------------------------------------------------------------------------
