Hello, I setup a virtualbox lab consisting of the following boxes: - Foreman master - dhcp + tftp + discovery - dns - puppet master + puppetca - puppetdb - test host
All the boxes are on the same network and I configured the discovery plugin as per guide. This is what happens: - power on test host, pxe boots to the pxe menu - discovery image loads correctly - host registers in foreman - start the provisioning from the foreman ui - host reboots and ends up in the pxe menu again After some digging it appears that when the host reboots it somehow wants to talk to the foreman master, instead of the proxy. This is proved by the fact that, if the TFTP server on the master is turned off, the second tftp request times out (the foreman master had the tftp enabled initially, hence why the two tftp servers). The pxe config file for the specific host, named by mac address, gets correctly generated on the proxy. I don't understand how the host is instructed to use this other tftp server, since I can't find any reference to its ip in the dhcp + tftp + discovery host. All looks good config wise. Thanks. -- You received this message because you are subscribed to the Google Groups "Foreman users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/foreman-users. For more options, visit https://groups.google.com/d/optout.
