Hello, this is expected, when you select PXEGrub2 bootloader, the DHCP option will not be pxelinux.0.
Our installer was recently enhanced with some support to seetup TFTP UEFI bootloaders via Puppet, this did not get its way into 1.13 I believe. What you really need is to copy the bootloader there from your boot partition (you will need to install grub2-efi for red hat system), or build your own via grub-mkimage (but this will not work with SecureBoot unless you sign it). If your proxy is running on Ubuntu or Debian, you need to download these from repositories (Ubuntu ones are signed, Debian are not). In the future, we want to distribute bootloaders extracted from main distributions in a separate package. These will be the official builds which are also signed (and work via shim). Here are initial builds, you can use them too. https://lzap.fedorapeople.org/temp/foreman-bootloaders/ More details at https://groups.google.com/forum/?fromgroups#!topic/foreman-dev/kEZaJ_8COsU On Mon, Dec 19, 2016 at 9:52 PM, Sean A <[email protected]> wrote: > Hello, > > I just received our first UEFI only system, and so far haven't played > with UEFI booting much. I've setup the associations between CentOS 7.2 > Operating System and all the grub/grub2 provisioning templates, created a > host that's using PXEGrub2, but the host will not pxeboot. The dhcp lease > is pointing the new host to grub2/grubx64.efi instead of pxelinux.0. The > tftpboot directory has a grub2 folder with the mac specific grub.cfg. When > the system boots, it waits a long time and goes back to the bios boot menu > (not grub2/pxe). The tftp server log shows a request for > grub2/grubx64.efi, with an error for file not found. So, it's looking like > my smart-proxy is not grabbing that file and stuffing it into the grub2 > directory. I've turned on debug logging in the proxy and when the build is > initiated, there does not seem to be an attempt to copy the file from > @mediapath /EFI/BOOT/grub2x64.efi. > > Has anyone else encountered this? Should I simply copy this file over > manually? > > Thank you kindly, > > -- > You received this message because you are subscribed to the Google Groups > "Foreman users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/foreman-users. > For more options, visit https://groups.google.com/d/optout. > -- Later, Lukas @lzap Zapletal -- You received this message because you are subscribed to the Google Groups "Foreman users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/foreman-users. For more options, visit https://groups.google.com/d/optout.
