I'm currently using Foreman/Puppet to manage configuration across some of our virtual machines in our VMware infrastructure. I'm now looking into the provisioning features of Foreman to actually deploy machines to further streamline things. I've looked through the manual pages and googled a bit but haven't been able to find concrete answers, so any assistance is appreciated.
1.) Under 'Infrastructure -> Provisioning Setup' the provisioning network shows the VLAN of the single NIC currently attached to the Foreman server. I want to provision my VMs in another VLAN, do I need to add another NIC to the Foreman server on this alternate VLAN and specify it here before proceeding? If this needs to be a NIC on the VLAN the provisioned machines will go into, how do I handle provisioning to multiple VLANs? 2.) Following on from Q1, in the network config should this be the domain/vlan I want to provision machines into or the domain/vlan of the Foreman server itself? 3.) Ideally I don't want any DNS or DHCP being performed by the Foreman server, is it just a simple case specifying IPAM: None and Bootmode: Static? Apologies for any idiocy. TIA! -- You received this message because you are subscribed to the Google Groups "Foreman users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/foreman-users. For more options, visit https://groups.google.com/d/optout.
