I am trying to do bare metal provisioning on the servers. Currently I am using the Kickstart default provisioning table, I think it is doing the install to my local hard disk /dev/sda, however that is not what I want. I want the OS to be installed to a Fibre Channel attached LUN. When I manually install the system I see the device I want show up in pvdisplay as /dev/mapper/mpatha2. This is a link to another device though: [root@ptleorted02splkp006 ~]# ls -l /dev/mapper/mpatha2 lrwxrwxrwx. 1 root root 7 Apr 21 08:50 /dev/mapper/mpatha2 -> ../dm-2
I am looking for some help in creating a new provisioning table to do the following: 1. Use the FC device listed above. 2. Setup the following partitions: 40GB / 50GB /opt 8GB swap 1GB /boot Thanks a lot! Luke -- You received this message because you are subscribed to the Google Groups "Foreman users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/foreman-users. For more options, visit https://groups.google.com/d/optout.
