It is possible, read the manual. LZ
On Fri, Oct 13, 2017 at 7:01 PM, No1 <[email protected]> wrote: > Hi, > > Is there way to alter the look/ columns that are being displayed under the > discovered hosts? > > Currently, it shows the Names with Mac address of the PXE NiC Interface > with No IPMI IP. This would give no information to me as I don't have any > way to verify which is being absent in the foreman. going with the NIC > interface MAC address is okay, but that would be difficult to look through > all the servers and identify which one failed to load the FDI image/ report > back to foreman. > > It would be nice to list the IPMI IP address or any other custom fact > like *"LL**dp_neighbor_sysname" or some other custom fact*?. > > *Is it really possible to customize the columns that are being displayed > under the Discovered Hosts page?* > > > > <https://lh3.googleusercontent.com/-SqfQ3JK04gY/WeDxSWhTBXI/AAAAAAAAAD8/4tDV01Fzotk243du4HZY5ylqdxJf4M2HQCLcBGAs/s1600/foreman-1.png> > > Thanks, > No1. > > -- > You received this message because you are subscribed to the Google Groups > "Foreman users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/foreman-users. > For more options, visit https://groups.google.com/d/optout. > -- Later, Lukas @lzap Zapletal -- You received this message because you are subscribed to the Google Groups "Foreman users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/foreman-users. For more options, visit https://groups.google.com/d/optout.
