Estimado.....
Aca esta una descripcion del error y su solucion...
Espero que te sirva...
Avisa como te fue...
Suerte.
Emilio G. Burgoa
San Juan - Argentina
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.
-.-.-
Cuando se cambia de versi�n de sistema operativo desde una V4RX a una V5RX,
al ejecutar las consultas QUERY puede aparecer el siguiente mensaje :
----------------------------------------------------------------------------
----
Visualizar formato de constantes
Consulta. . . . . : AARAUL Opci�n . . . . . : CAMBIAR
Biblioteca. . . : DATABASE CCSID . . . . . . : 65535
Para entrar una constante de tipo fecha u hora, utilice un formato SAA
o bien el formato descrito mediante los valores siguientes.
Utilice el separador decimal que aparece.
Valores de definici�n de Consulta
Formato de fecha . . . . : *DMY
Separador de fecha . . . : /
Formato de hora . . . . . : *HMS
Separador de hora . . . . : :
Separador decimal . . . . : ,
Pulse Intro para continuar
F12=Cancelar
----------------------------------------------------------------------------
----
Este mensaje de error se soluciona cambiando los siguientes mensajes, como
se indica a continuaci�n:
----------------------------------------------------------------------------
----
Cambiar descripci�n de mensaje (CHGMSGD)
Teclee elecciones, pulse Intro.
Identificador de mensaje . . . . > CPX2D06 Nombre
Archivo de mensajes . . . . . . > QCPFMSG Nombre
Biblioteca . . . . . . . . . . > QSYS Nombre, *LIBL, *CURLIB
Texto mensaje primer nivel . . . '42$11 - 2$ 1111'
Los d�gitos en rojo son los que cambiaron
Texto mensaje segundo nivel . . *NONE
...
C�digo de gravedad . . . . . . . 0 0-99, *SAME
M�s...
F3=Salir F4=Solicitud F5=Renovar F12=Cancelar
F13=C�mo utilizar esta pantalla F24=M�s teclas
----------------------------------------------------------------------------
----
Cambiar descripci�n de mensaje (CHGMSGD)
Teclee elecciones, pulse Intro.
Identificador de mensaje . . . . > QRX3002 Nombre
Archivo de mensajes . . . . . . > QQRYMSG Nombre
Biblioteca . . . . . . . . . . > QSYS Nombre, *LIBL, *CURLIB
Texto mensaje primer nivel . . . 'A D OR AND , . O E F J *ALL
*NONE Hay que cambiar el orden del punto y la coma, dejarlo como
esta aqu�
Y N L T Z V G'
Texto mensaje segundo nivel . . *NONE
...
C�digo de gravedad . . . . . . . 0 0-99, *SAME
M�s...
F3=Salir F4=Solicitud F5=Renovar F12=Cancelar
F13=C�mo utilizar esta pantalla F24=M�s teclas
----------------------------------------------------------------------------
----
La descripci�n de los valores del mensaje CPX2D06 es la siguiente :
IDDU or QUERY :
Values contained in this message are to be used in order to determine
the initial values placed on a display such as the IDDU or QUERY
"Describe Numeric Field Editing" screen when numeric editing information
for the field definition is not yet defined:
:p. 4: Default date/time separator...
1=period, 2=comma, 3=colon, 4=slash, 5=dash
:p. 1: Default decimal separator...
1=period, 2=comma, 3=colon, 4=currency symbol, 5=none
:p. $: Character to be used as symbol for decimal separator.
The '$' to be translated is the English default for
decimal separator if option 4=currency symbol is selected
on the previous item, above. It can be translated to any
other single byte character. That same symbol should be
made to appear on the following 'Describe Numeric Field
Editing' displays:
Component Product NTVSRC DDS Display
--------- ------- ---------- -------
IDDU XPF QDIDDU DSE1FM01
Query QRY QUDDS F17EDIT
Office XPF QDOEDSPF NUMEDIT1 (See NOTE below)
NOTE: The profile document, SYSTEM, stored in QPRFFLR should
also be translated to correspond to the decimal point option
4 value, just as CPX2D06 was translated to correspond to the
decimal point option 4 value that appears on IDDU and QUERY
displays. See folder handlin section of publication 5728 WP1
Office NLV Build Proce for more information.
:p. 2: Default thousands separator...
1=period, 2=comma, 3=apostrophe, 4=blank, 5=none
:p. 2: Default for show negative symbol
1=yes, show a negative symbol for negative numbers
2=no, do not show a negative symbol
:p. blanks: Left negative symbol default value...
All blanks means no symbol is shown.
Up to six characters which constitute the symbol.
Leading and/or embedded blanks are allowable.
Underscore can be used to represent a blank.
Trailing blanks, if desired, must be shown as underscore.
:p. -: Right negative symbol default value...
All blanks means no symbol is shown.
Up to six characters which constitute the symbol.
Leading and/or embedded blanks are allowable.
Underscore can be used to represent a blank.
Trailing blanks, if desired, must be shown as underscore.
:p. 2: Default for show currency symbol
1=yes, show a currency symbol
2=no, do not show a currency symbol
:p. $: Left currency symbol default value...
All blanks means no symbol is shown.
Up to six characters which constitute the symbol.
Leading and/or embedded blanks are allowable.
Underscore can be used to represent a blank.
Trailing blanks, if desired, must be shown as underscore.
:p. blanks: Right currency symbol default value...
All blanks means no symbol is shown.
Up to six characters which constitute the symbol.
Leading and/or embedded blanks are allowable.
Underscore can be used to represent a blank.
Trailing blanks, if desired, must be shown as underscore.
:p. 1: Default for print zero value
1=yes, print zero value as zero
2=no, print zero value as blank
:p. 1: Default for replace leading zeroes
1=yes, do leading zero replacement
2=no, do not replace leading zeroes
:p. 1: Default for leading zeroes replacement character
1=replace with blanks
2=replace with asterisks
3=replace with blanks and float the left currency symbol
:p. 2: Default for show single leading zero
1=yes, leave a leading zero to the left of the decimal
separator when the absolute value of the number is less
than 1.0
2=no, do not leave a leading zero
> -----Mensaje original-----
> De: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]
> Enviado el: Mi�rcoles, 18 de Mayo de 2005 01:44 p.m.
> Para: [email protected]
> Asunto: [Help400] Par�metros QRY
>
> Hola a todos.
>
> Hace unos meses hice unos cambios en los par�metros del mandato QRY por
> indicaci�n de un mensaje que apareci� en el foro, para evitar la pantalla
> siguiente en la entrada al QRY:
>
> Visualizar formato de constantes
>
>
>
> Consulta. . . . . : xxxxxxxxx Opci�n . . . . . : CAMBIAR
>
> Biblioteca. . . : QRY CCSID . . . . . . : 65535
>
>
>
> Para entrar una constante de tipo fecha u hora, utilice un formato SAA
>
> o bien el formato descrito mediante los valores siguientes.
>
>
>
> Utilice el separador decimal que aparece.
>
>
>
> Valores de definici�n de Consulta
>
> Formato de fecha . . . . : *DMY
>
> Separador de fecha . . . : /
>
> Formato de hora . . . . . : *HMS
>
> Separador de hora . . . . : :
>
> Separador decimal . . . . : ,
>
>
>
>
>
>
>
>
>
> Pulse Intro para continuar
>
>
>
> F12=Cancelar
>
>
>
> Al hacer ese cambio deb� teclear mal y ahora mismo tengo dos problemas:
>
> Por un lado esta pantalla sigue apareciendo.
>
> Por otro, cuando termino un qry si quiero guardarlo tengo que dejar la
> pantalla que aparece por omisi�n, o sea, salvar..... "N". Y para no
> guardarlo tengo que teclear "L".
>
> No me hice copia de como estaban antes del cambio y no s� solucionarlo.
> Quiero dejar estos par�metros como estaban.
>
> Alguien me puede ayudar?.
>
> Gracias.
>
>
<<attachment: winmail.dat>>
