Muchisimas Gracias.
Fernando.
2005/8/18, gerardo.santillana <[EMAIL PROTECTED]>:
creo que esto es lo que necesitasla solución puede ser cambiar los valores por defecto del QUERY , que estan en el mensaje CPX2D06WRKMSGD CPX2D06 .... opcion 2 (cambiar)}yo tengo :42$11 - 2$ 1112si con esto no lo solucionas, puedes leerte el resto del mensaje que te explica que significa cada simbolo
IDDU or QUERY :
Values contained in this message are to be used in order to determine
the initial values placed on a display such as the IDDU or QUERY
"Describe Numeric Field Editing" screen when numeric editing information
for the field definition is not yet defined:
:p. 4: Default date/time separator...
1=period, 2=comma, 3=colon, 4=slash, 5=dash
:p. 1: Default decimal separator...
1=period, 2=comma, 3=colon, 4=currency symbol, 5=none
:p. $: Character to be used as symbol for decimal separator.
The '$' to be translated is the English default for
decimal separator if option 4=currency symbol is selected
on the previous item, above. It can be translated to any
other single byte character. That same symbol should be
made to appear on the following 'Describe Numeric Field
Editing' displays:
Component Product NTVSRC DDS Display
--------- ------- ---------- -------
IDDU XPF QDIDDU DSE1FM01
Query QRY QUDDS F17EDIT
Office XPF QDOEDSPF NUMEDIT1 (See NOTE below)
NOTE: The profile document, SYSTEM, stored in QPRFFLR should
also be translated to correspond to the decimal point option
4 value, just as CPX2D06 was translated to correspond to the
decimal point option 4 value that appears on IDDU and QUERY
displays. See folder handlin section of publication 5728 WP1
Office NLV Build Proce for more information.
:p. 2: Default thousands separator...
1=period, 2=comma, 3=apostrophe, 4=blank, 5=none
:p. 2: Default for show negative symbol
1=yes, show a negative symbol for negative numbers
2=no, do not show a negative symbol
:p. blanks: Left negative symbol default value...
All blanks means no symbol is shown.
Up to six characters which constitute the symbol.
Leading and/or embedded blanks are allowable.
Underscore can be used to represent a blank.
Trailing blanks, if desired, must be shown as underscore.
:p. -: Right negative symbol default value...
All blanks means no symbol is shown.
Up to six characters which constitute the symbol.
Leading and/or embedded blanks are allowable.
Underscore can be used to represent a blank.
Trailing blanks, if desired, must be shown as underscore.
:p. 2: Default for show currency symbol
1=yes, show a currency symbol
2=no, do not show a currency symbol
:p. $: Left currency symbol default value...
All blanks means no symbol is shown.
Up to six characters which constitute the symbol.
Leading and/or embedded blanks are allowable.
Underscore can be used to represent a blank.
Trailing blanks, if desired, must be shown as underscore.
:p. blanks: Right currency symbol default value...
All blanks means no symbol is shown.
Up to six characters which constitute the symbol.
Leading and/or embedded blanks are allowable.
Underscore can be used to represent a blank.
Trailing blanks, if desired, must be shown as underscore.
:p. 1: Default for print zero value
1=yes, print zero value as zero
2=no, print zero value as blank
:p. 1: Default for replace leading zeroes
1=yes, do leading zero replacement
2=no, do not replace leading zeroes
:p. 1: Default for leading zeroes replacement character
1=replace with blanks
2=replace with asterisks
3=replace with blanks and float the left currency symbol
:p. 2: Default for show single leading zero
1=yes, leave a leading zero to the left of the decimal
separator when the absolute value of the number is less
than 1.0
2=no, do not leave a leading zeroGerardo Santillana
IT Department
Delphi Mechatronic Systems
Phone USA (956) 554 5832
Phone MX 01868 8128163 x.5832-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Fernando
Sent: Thursday, August 18, 2005 8:32 AM
To: Help/400 Forum
Subject: Punto decimal y comaBuenos dias, alguno de Uds. me puede pasar cual es el mensaje que hay que modificar y como, para que cuando se ejecuta un Qry los campos numericos aparezcan con el punto en los miles y la coma en los decimales.Desde ya agradezco de antemano la auda brindada.Fernando.
****************************************************************************************
Note: If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you.
****************************************************************************************
