Saludos a todos   Estoy llamando a un programa del 400 desde una pagina web, 
esto es parte del programa  Dim cntDim rsDIM fldDim cmddim nfldcmdtxt="call 
mylib.oc800b3 ('" & zitem &  "')"   Set cnt = 
Server.CreateObject("ADODB.Connection")cnt.open "dsn=myas400", "user", 
"password"   set cmd=cnt.execute(cmdtxt)Set rs = cnt.execute("Select * from 
mylib.oc800wk")  y al checar el trabajo QZDASOINIT  en el joblog veo este 
mensaje de error,                                Display Job Log                
                                                                              
System:   DEV      Job . . :   QZDASOINIT    User . . :   QUSER         Number 
. . . :   177825                                                                
                      Job 177825/QUSER/QZDASOINIT started on 01/03/07 at 
16:04:55 in subsystem         QUSRWRK in QSYS. Job entered system on 01/03/07 
at 16:04:55.                 Printer device TESTQ not found.                    
            !
   
              Errors on CHGJOB command for job 177825/QUSER/QZDASOINIT.         
             Printer device TESTQ not found.                                    
            ACGDTA for 177825/QUSER/QZDASOINIT not journaled; reason 1.         
           Job changed successfully; however errors occurred.                   
          User WEBUSER from client XX.XX.X.XX connected to server.              
         Library *SYSLIBL not found.                                            
     Al presionar F1 sobre el mensaje "Library  *SYSLIB not found" esto es lo 
que me muestra                        Additional Message Information            
                                                                                
            Message ID . . . . . . :   CPF2110       Severity . . . . . . . :   
40         Message type . . . . . :   Escape                                    
          Date sent  . . . . . . :   01/04/07      Time sent  . . . . . . :   
10:35:01                         !
   
                                                       Message . . . . :   
Library *SYSLIBL not found.                                Cause . . . . . :   
Library *SYSLIBL does not exist in the auxiliary storage     pools (ASPs) 
accessed by the command or API.                                 Recovery  . . . 
:   Either create the library (CRTLIB command), correct the      library name, 
or make the primary or secondary auxiliary storage pool (ASP)    where storage 
for the library is allocated accessible to the command or API.   Then try the 
request again.                                                      To make the 
ASP accessible, check that the ASP device has the status         required by 
the command or API (WRKCFGSTS command). Then, if the command or    API has an 
auxiliary storage pool parameter, use it to specify the ASP.        Otherwise, 
set the ASP group containing the ASP as the ASP group for the       current 
thread (SETASPGRP command).                            !
   
            Alguna pista?... Gracias  Gerardo Santillana 

_______________________________________________
Join Excite! - http://www.excite.com
The most personalized portal on the Web!
__________________________________________________
Forum.HELP400 es un servicio más de NEWS/400.
© Publicaciones Help400, S.L. - Todos los derechos reservados
http://www.help400.es
_____________________________________________________

Para darte de baja visita la siguente URL:
http://listas.combios.es/mailman/listinfo/forum.help400

Responder a