excuses mais je suis adel a d e l et pas a d è l e, merci d'en tenir compte. bon pour ton fichier de 2 mo ça me paraît un peu trop petit pour un fichier de pilotes.
apparemment il te demande de mettre à jour le firmware de ton imprimante que tu dois aller chercher sur le site de HP. chose rare mais ça peut arriver. donc, télécharges et installes le nouveau firmware puis télécharges les pilotes appropriés et installes les. bon courage. adel Le 15 janv. 2013 à 20:55, Syllepsu <[email protected]> a écrit : > Merci Adèle, mais pas moyen d'y parvenir, le fichier que HP me propose est > un fichier image apparemment, de 2 MO. > Les instructions me sont inaccessibles. Les voici, au cas où quelqu'un > aurait été confronté par chance, pour moi, au même problème: > > Merci. > > Product Name(s): HP Color LaserJet 1600 > Model Number(s): CB373A > > Description > > This utility is for use on Mac OS X Operating systems. > > The utility can be used with a USB connection. Be sure to use the firmware > update utility that is specific to your printer model. > > This update is recommended for the HP Color LaserJet 1600 Series that have a > firmware version older than the one posted. > > This utility updates the printer firmware version to the latest version. > > The firmware version can be found on the Self Test/Configuration Page which > can be printed from the printer's Reports menu. > > Fixes > > Firmware Version 20120928 Fix: > ? Added the "RFU" item to the "Setup Menu" to control remote firmware > updates. The options are "On", "Off", and "Off and Locked". The default > value is "On" – permitting firmware updates. Changing it to "Off" or "Off > and Locked" will prevent firmware updates. > > Installation Instructions > > Instructions for the HP Color LaserJet 1600 Series Flash Firmware Update > using Mac OS X operating systems: > > Flash Firmware Update Notes: > > • The Firmware Update Utility can use a USB connection to the printer. > • The HP MFP printer must be on and in a READY state as shown by the LCD > display on the control panel and remain powered on during the entire > firmware update process. > • Depending on the processor speed of your Mac, the firmware update process > may complete on the printer before the update status progress bar in the > flash firmware update utility on the pc screen completes, this is normal. > • Once the update process has started, do not use your computer for any > other activity until the process is complete. > • Inform others connected to the product, both network and USB, to refrain > from using the printer during the update period. > • Do not power cycle the product or the computer until the firmware update > process is complete. > > Process: > > 1. Download the flash firmware updater file from HP.com to the Mac desktop. > 2. Turn the printer off and then back on to clear main printer memory. > 3. Double click on the flash firmware update utility file. An HP firmware > update window will open. > 4. Select the appropriate MFP in the dialog window. If you assigned a > different name to the HP MFP, choose the name that represents the correct > printer. > 5. Click on "Send Firmware" when ready to proceed. > 6. The progress bar will begin to move to the right indicating information > being transferred. > 7. DO NOT power cycle the product or the computer during this process or the > product may become unstable and or unusable without further attention from > HP. The flash firmware update can take up to 5 minutes to complete. Please > be patient. > 8. During the product flash firmware update, the display on the product > control panel will display "Erasing - Programming - Complete - > Hewlett-Packard - Ready - Initializing - Ready". Once the download is > finished the printer will be in the Ready state. > 9. At the conclusion of the firmware update, the dialog window will show a > smiley face. Click on exit. > 10. The flash firmware update process is complete. > > If it is desired to verify the update, use the control panel reports menu > under setup, to print a configuration report. The configuration report will > show the current firmware revision in the Product information block. > > System Requirements > > This utility is for use on Mac OS X 10.5, Mac OS X 10.6, Mac OS X 10.7, Mac > OS X > > Bas du formulaire > > > > > > -----Message d'origine----- > De : [email protected] [mailto:[email protected]] De la part > de adel > Envoyé : mardi 15 janvier 2013 12:47 > À : Liste CeciMac.org > Objet : Re: [CeciMac] problème d'imprimante sur MacBook pro > > bonjour, > dans ce cas il faut aller chercher les pilotes pour mac os x sur le site hp. > > adel > > > > > Le 15 janv. 2013 à 12:42, Syllepsu <[email protected]> a écrit : > >> L'installation de mon imprimante HP color LaserJet 1600 sur mon récent >> Macbook ne se fait pas. quand je la branche avec sa connexion USB rien >> ne se passe, le Mac ne réagit pas. >> >> A noter qu'elle fonctionne à peu près bien avec le PC sous W7, pour >> les fichiers texte en tout cas, elle refuse néanmoins d'imprimer les >> fichiers JPG. >> >> Sur le Mac, pour comparer, j'ai fait l'expérience d'en connecter une >> autre, une HP Laser 1010, un modèle plus ancien, elle a été aussitôt >> reconnue par le Mac. >> >> A votre avis ? >> >> Merci. >> >> _______________________________________________ >> Liste de CeciMac >> [email protected] >> Pour configurer vos options: >> http://mail.tft-bbs.co.uk/mailman/listinfo/forum > > _______________________________________________ > Liste de CeciMac > [email protected] > Pour configurer vos options: > http://mail.tft-bbs.co.uk/mailman/listinfo/forum > > _______________________________________________ > Liste de CeciMac > [email protected] > Pour configurer vos options: http://mail.tft-bbs.co.uk/mailman/listinfo/forum _______________________________________________ Liste de CeciMac [email protected] Pour configurer vos options: http://mail.tft-bbs.co.uk/mailman/listinfo/forum
