Dear Forum,
following the announcement of new experimental Windows binaries for
GAP 4.4.10
with the support of dynamically loaded modules and, as a consequence,
availability
of packages Browse, Edim and IO under Windows, I am happy to announce
the
corresponding Windows installer:
ftp://ftp.gap-system.org/pub/gap/windowsinstaller/
winbin4r4p10ED123IO23BR11.exe
that may be used if the previous GAP installation was made using the
Experimental
GAP Installer for Windows (http://ukrgap.exponenta.ru/wininst/
wininst.htm).
Please note that this is experimental work, and it is advised to
study the description
at http://www-groups.mcs.st-and.ac.uk/~neunhoef/Computer/Software/Gap/
winbinary.html
before any installation. Any feedback will be welcomed.
Best wishes,
Alexander
On 8 Oct 2007, at 23:14, Max Neunhoeffer wrote:
Dear Forum,
I have set up a web page from which one can download new
experimental Windows binaries for GAP 4.4.10. Download and
installation instructions are at
http://www-groups.mcs.st-and.ac.uk/~neunhoef/Computer/Software/Gap/
winbinary.html
With these binaries it is possible to dynamically load
compiled modules into the GAP kernel also under Windows.
In this way, the GAP packages Browse, EDIM and IO work
under Windows. Compiled modules for these packages in their
current versions are included in the above binary archive.
As mentioned above this is all still experimental. I would
welcome any feedback about how it works.
Best regards,
Max.
_______________________________________________
Forum mailing list
[email protected]
http://mail.gap-system.org/mailman/listinfo/forum
