Can you try again to reproduce the problem that i have with the PSPad version bigger than 4.5.1 (standard version) where it was right. I have this problem with 2234, 2231, 2228 versions.
Title of the problem : _Calling PSPad from DOS prompt a second time_ - PSPad is not running - open DOS window - set directory to PSPad directory - on DOS window call: _PSPad.exe licence.txt_ (It runs PSPad and loads Licence.txt file) - on PSPad, close the Licence.txt file - on the same DOS window (do F3) to call again : _PSPad.exe licence.txt_ Then you should see my problem : PSPad is always with an empty window but the title is "_PSPad - [pspad.exe licence.txt]_" If the second call on DOS was _PSPad.exe /R licence.txt_, then it gives also an empty window but the title is then "[b]PSPad - [pspad.exe /R licence.txt][/b]" Note that with the 4.5.1 version, the licence.txt is in the window in Read-Only mode and the title is "_PSPad - [c:\directory\pspad\licence.txt R/O]_" With the version 2227 (or 2223), it was OK for the licence.txt file in a second tab but it open also a first tab with PSPad.exe edited in hexa ! Do you reproduce this problem ? :-P Best regards ;-) -- <http://forum.pspad.com/read.php?6,32479,32539> PSPad freeware editor http://www.pspad.com
