This message is from the T13 list server.
I am looking at the printed 1532D, volume 1, revision 1 28 August 2002
oops !!! My eyes slipped down a line.
I guess this was a false alarm.
Thanx, Hale !!!
Halve Phun !!!
-----------------------------------------------------------------
Jim Hatfield
ATA Interface Firmware & T13 (ATA/ATAPI) Standards Representative
Seagate Technology - PSG
e-mail: [EMAIL PROTECTED]
s-mail: 389 Disc Drive; Longmont, CO 80501 USA
voice: 720-684-2120
fax : 720-684-2711
====================================================
"Hale Landis"
<hlandis@indr To: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>
a.com> cc:
Sent by: Subject: Re: [t13] FYI: Conflicts in
Annex B
owner-forum@t
13.org
No Phone Info
Available
01/28/2003
03:24 PM
Please
respond to
"Hale Landis"
This message is from the T13 list server.
On Tue, 28 Jan 2003 10:42:50 -0700, [EMAIL PROTECTED]
wrote:
>This message is from the T13 list server.
>Annex B has some conflicts that we seem to have missed.
>Table B.1
> says that opcodes 0xC8-0xCF are reserved for the
> CompactFlast(tm) Assoc.
In the printed copy of ATA/ATAPI-5 revision 2 I have here it shows
the CFA commands as 0xB8-0xBF. This is shown in table F.1.
In the printed copy of ATA/ATAPI-7 Vol 1 revision 0D I have here it
also shows the CFA commands as 0xB8-0xBF. This is shown in table B.1.
>Does anyone have a suggestion about how to resolve this conflict ?
I don't think there is a conflict... I think it is a "typo" or
"cut/paste" error... or maybe something else like a DOC to PDF
conversion error?
Jim: What version of ATA/ATAPI-x are you looking at?
Hale
*** Hale Landis *** www.ata-atapi.com ***
