This message is from the T13 list server.
This was addressed at this week's meeting. Table B.2 and B.3 have been
updated.
Making this into an ATA-6 errata list is still a possiblity.
The committee has not yet investigated the proper procedure for authorizing
an errata document
for ATA/ATAPI-6.
Thank You !!!
-----------------------------------------------------------------
Jim Hatfield
ATA Interface Firmware & T13 (ATA/ATAPI) Standards Representative
Seagate Technology - PSG
e-mail: [EMAIL PROTECTED]
s-mail: 389 Disc Drive; Longmont, CO 80503 USA
voice: 720-684-2120
fax : 720-684-2711
====================================================
|---------+---------------------------->
| | "Hale Landis" |
| | <[EMAIL PROTECTED]|
| | m> |
| | Sent by: |
| | [EMAIL PROTECTED]|
| | rg |
| | |
| | |
| | 10/08/2003 10:07 |
| | PM |
| | Please respond to|
| | "Hale Landis" |
| | |
|---------+---------------------------->
>---------------------------------------------------------------------------------------------------------------------------------------------|
|
|
| To: "T13 List Server" <[EMAIL PROTECTED]>
|
| cc:
|
| Subject: [t13] ATA/ATAPI-6 Cmd Code table
|
>---------------------------------------------------------------------------------------------------------------------------------------------|
This message is from the T13 list server.
It seems that command code C0h is listed as "vendor specific" in the
tables at the back of the document but this command code is defined
as the CFA ERASE SECTORS command. Looks like something to add to the
ATA/ATAPI-6 errata list?
Hale
*** Hale Landis *** www.ata-atapi.com ***
