This message is from the T13 list server.
In reviewing the ATA/ATAPI-7 V3, R4, Figure 18, I see that the vertical location of the SATA connector is listed as 3.5 mm from the bottom of the drive. However, I am unsure where on the connector the top measurement is made. Is it the top of the connector, the top of the "L" on which the pins are mounted, the location of the pins, or ??? What part of the connector is 3.5 mm from the bottom of the drive? Any help in clarifying this would be appreciated. Thank you, Hugh Curley [EMAIL PROTECTED]
