This message is from the T13 list server.
Mike
You are correct. I misread his question...
------------------------------------------------
Curtis E. Stevens
29 Dewey
Irvine, Ca. 92620
Home Phone: 949-552-4777
Cell: 949-307-5050
E-Mail: [EMAIL PROTECTED]
----- Original Message -----
From: "Eschmann, Michael K" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, February 18, 2004 10:02 AM
Subject: RE: [t13] How to detect whether a host adapter complies with 1510D
> This message is from the T13 list server.
>
>
> Not exactly. 1510D includes ADMA, which your information is correct.
> However non-ADMA HBA's are harder to detect. I can tell you everything
> with Class+SubClass 0101 and VID=8086 are generally compliant with this,
> but UDMA capabilities are dependent on the DevID found. In general you
> have to build a VID/DID/CC/SCC table in a driver/BIOS to determine what
> maps to the non-ADMA features described in the document. We put this
> stuff in to just document existing designs. MKE.
>
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
> Curtis E. Stevens
> Sent: Wednesday, February 18, 2004 9:33 AM
> To: [EMAIL PROTECTED]
> Subject: Re: [t13] How to detect whether a host adapter complies with
> 1510D
>
> This message is from the T13 list server.
>
>
> Thomas
>
> You detect compliance by looking at the PCI Class and Subclass.
> Class =
> 01, Subclass = 05, indicates that the HBA is compliant with INCITS 370
> (1510D).
> ------------------------------------------------
> Curtis E. Stevens
> 29 Dewey
> Irvine, Ca. 92620
>
> Home Phone: 949-552-4777
> Cell: 949-307-5050
> E-Mail: [EMAIL PROTECTED]
> ----- Original Message -----
> From: "Thomas Jansen, WTY Soft" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Wednesday, February 18, 2004 5:37 AM
> Subject: [t13] How to detect whether a host adapter complies with 1510D
>
>
> > This message is from the T13 list server.
> >
> >
> > >Hi,
> > >I have been playing with host adapter programming a bit lately and
> found
> > document 1510D. By now, I know that the bus-master part works on most
> host
> > adapters I've seen but the setup >registers in annex B are not. The
> way I
> > read the spec they don't have to do, so I guess that's ok. The only
> thing
> > I'm missing in the spec is how to detect that the host adapter
> > supports >the bus-master programming and / or setup registers.
> > >
> > >Can anyone clarify this to me ?
> > >
> > >Thanks in advance,
> > >Thomas
> >
> > What I mean is how can I detect whether a host adapter complies with
> this
> > standard.
> >
> > Thomas
> >
> >
> >
> >
> >
