[t13] RE: SAT-r02 Posted

[Sheffield, Robert L]

Title: SAT-r02 Posted

Bill,   Good catch. It will be fixed in the next revision, along with putting WRITE BUFFER in its correct place in alphabetic order.   Thanks, Bob Sheffield From: Bill Martin [mailto:[EMAIL PROTECTED] Sent: Wednesday, February 23, 2005 10:25 AM To: Sheffield, Robert L; 'T10 Reflector'; Forum@t13.org Subject: RE: SAT-r02 Posted Rob:   In looking at the SAT document, there is an error in table 4.  READ BUFFER is listed as 3Bh (should be 3Ch) and WRITE BUFFER is listed as 3Ch (should be 3Bh).  These are reversed.  It appears to be correct throughout the remainder of the document.   Bill Martin Sr. Principal Engineer Standards and Interoperability Sierra Logic, Inc. 916 772-1234 x 112 [EMAIL PROTECTED] From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sheffield, Robert L Sent: Friday, February 18, 2005 3:27 PM To: T10 Reflector; Forum@t13.org Subject: SAT-r02 Posted   I have posted revision 2 of the draft SCSI / ATA Translation (SAT-r02) standard on the T10 website. The document is posted at: http://www.t10.org/ftp/t10/drafts/sat/sat-r02.pdf The new revision incorporates proposal 04-218r8 approved for incorproation at the January plenary, a number of changes identified during draft review over the last 3-4 months, and a number of editorial corrections. Regards, Bob Sheffield