RE: [t13] Response FIS type

John Masiewicz Thu, 07 Apr 2005 15:14:00 -0700

Yamina

Thank you for finding the typo. It was inadvertently copied during the edit. I will correct it in the next version. I will try to send the rev 0.1 for posting tomorrow.

John Masiewicz

ATA8-ST Technical Editor

Western Digital

(949) 672-7686

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Yamini Shastry
Sent: Thursday, April 07, 2005 1:18 PM
To: [email protected]
Subject: [t13] Response FIS type

In the draft document: D1697r0a-ATA8-ST for AT Attachment-8 - Serial Transport (ATA8-ST).

In section 7.5.3, the response FIS type is mentioned as 27h, should it not be 34h (which is the register device to host FIS)? What is a response FIS used for, other than to indicate Command completion status?

RE: [t13] Response FIS type

In the draft document: D1697r0a-ATA8-ST for AT Attachment-8 - Serial Transport (ATA8-ST).

In section 7.5.3, the response FIS type is mentioned as 27h, should it not be 34h (which is the register device to host FIS)? What is a response FIS used for, other than to indicate Command completion status?

Thanks,

Yamini

Reply via email to