[t13] Question on receiver design

[Mike Jackson]

This is a simple question, but could someone please point me to a discussion on the difference between the type of receivers mentioned in the 10a standard (tracking, non-tracking and oversampling as mentioned at the top of p274)?  I can find info on oversampling, but nothing yet on tracking vs. non-tracking.  Thanks in advance for any help.   Mike Jackson From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Curtis Stevens Sent: Tuesday, August 01, 2006 7:46 PM To: forum@t13.org Subject: [t13] Issue #141 SET MAX ADDRESS has the following statement:   “A successful READ NATIVE MAX ADDRESS command shall immediately precede a SET MAX ADDRESS command.”    This places a requirement on the host and does not actually describe the issue.   This is my proposed resolution:   “If the SET MAX ADDRESS command is not preceded by a successful READ NATIVE MAX ADDRESS command, the drive may abort the SET MAX ADDRESS command or execute one of the following commands: SET MAX SET PASSWORD, SET MAX LOCK, SET MAX UNLOCK, SET MAX FREEZE LOCK.”   The real outcome of this command when it is not preceded by a READ NATIVE MAX depends on the Feature field which is marked N/A…   ------------------------------------------------- Curtis E. Stevens 20511 Lake Forest Drive #C-214D Lake Forest, California 92630 Phone: 949-672-7933 Cell: 949-307-5050 E-Mail: [EMAIL PROTECTED]