Repeatable here, too, with a clarification -- the Undo apparently only affects the
sheet which is current at the time the Annotate operation is done, and that sheet must
be current when the Undo is pressed to have any effect at all. The bug occurs with
both clearing (Reset) and renumbering operations.
Dwight Harm
Trax Softworks, Inc.
-----Original Message-----
From: Michael Beavis [mailto:[EMAIL PROTECTED]]
Sent: Thursday, May 17, 2001 7:04 PM
To: Protel EDA Forum
Subject: [PEDA] Annotation bug
G'day all
I noticed the other day, a reference to the annotation feature having known bugs but
couldn't find this bug listed in the previous postings link.
In a schematic consisting of a master and three sub-sheets, running 99SE SP6 on NT4,
the Reset Designators option was used to clear the numeric content of the designators
to ? on all four sheets. When the Undo button was clicked, only the master sheet
returned to the previous state. The three sub-sheets refused to Undo. Luckily regular
saving averted disaster.
The process is repeatable with this schematic but I haven't had time to try it on any
others. If anyone else can confirm this behaviour it can be added to the bug list
where ever that is.
Regards,
Michael Beavis
Advanced Mining Technologies Pty Ltd
Research & Development dept
PO Box 5107, Chittaway Bay, NSW, 2261, (Australia)
(3 Co-Wyn Close, Fountaindale, NSW, 2258)
Tel: (+61) 2 4389 2344
Fax: (+61) 2 4389 2355
Email: [EMAIL PROTECTED]
Website: www.advminingtech.com.au
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=ave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
