Hi all I have been on vacation. At 10:35 AM 5/29/2001 -0500, you wrote: >Geoff, > Thank you for the information on editing the menu bar, and the >question on the .ins files. My concern was not on how to edit the menu bar >but the 2000 issue that Mr. Garfield had mentioned which Mr. Harm was able >to explain, which I thank as well. > >Mr. Garfield wrote: ><snip> > > > Make your own icons and the caps as you see them below. > > By the way if you are running winn2000 you will have to change PBRUSH.EXE > > with MSPAINT.EXE in two files. Client99se.ini under winnt and >Client99se.ins under design > > explorer 99 se. Otherwise your icon editor will not work with client. ><snip> > >Mr. Harm wrote: > ><snip> > >The .ins is just a text file, you could use notepad or wordpad -- but you > >don't need to edit the .ins file -- the reference to PBRUSH there is just a > >comment. > > >As far as the .ini file goes, on my Win2K-sp1 system, from Run... either > >pbrush.exe or mspaint.exe gets you the same program. However, I found that > >I had to edit the client99se.ini to have the full path: My Winn2000 does not have pbrush.exe and Protel would not execute mspaint.exe. Every time I changed the ini file to mspaint.exe Protel changed it back to pbrush.exe until I found the so called reference to pbrush.exe there in the ins file. The "just a comment" was changing the ini file back to pbrush.exe from mspaint.exe. Changing the ins file fix this problem. This is for a Winn2000 os only as far as I can tell. > >RunPictureEditor=C:\WINNT\system32\MSPAINT.EXE > > >For some reason, just having "mspaint.exe" didn't work. ><snip> > >Regards, > >Ted Tontis > >-----Original Message----- >From: Geoff Harland [mailto:[EMAIL PROTECTED]] >Sent: Sunday, May 27, 2001 6:55 PM >To: Protel EDA Forum >Subject: Re: [PEDA] Manual route rats nest jump > >Geoff wrote: ><snip> > >You could do a lot worse then read the >on-line help and written > >documentation provided on how to > >customise your resources. The above > >description is really just a summary > >of what is involved. > > >Memo to anyone preparing FAQ files for Protel: consider including the above > >material in a question on customising Protel's resources. ><snip> > >Regards, >Geoff Harland. >----------------------------- >E-Mail Disclaimer >The Information in this e-mail is confidential and may be legally >privileged. It is intended solely for the addressee. Access to this >e-mail by anyone else is unauthorised. If you are not the intended >recipient, any disclosure, copying, distribution or any action taken >or omitted to be taken in reliance on it, is prohibited and may be >unlawful. Any opinions or advice contained in this e-mail are >confidential and not for public display. > > Rusty Garfield Development Technician IV Sugar Land Product Center (281) 285-7611 (voice) (281) 285-7619 (fax) [EMAIL PROTECTED] (e-mail) * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/subscrib.html * - or email - * mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
