To change the colour, click the 'Browse PCB' tab and select 'Nets'. Pick
any net and click on 'Edit'. Select a colour, and use the global tab if you
want to set all nets to the same colour.
I don't think you can set the displayed width for connections, but I'm
willing to be proved wrong!
Regards
Andy Gulliver
> -----Original Message-----
> From: Ian Rozowsky [mailto:[EMAIL PROTECTED]]
> Sent: 31 May 2001 08:11
> To: Protel EDA Forum
> Subject: [PEDA] Color of ratsnest in PCB
>
>
> Hi all
>
> Is there any way of changing the color and thickness of the
> ratsnest in the PCB editor? I've tried changing the color of
> "Connections" in the preferences, but this does not change the
> color of the ratsnest.
>
> TIA
>
> Ian Rozowsky
> Engineering Manager
> Centurion Systems
> P.O. Box 506
> Cramerview 2060
> South Africa
> Tel : +27-11-462-4499
> Fax : +27-11-704-3412
> e-mail: [EMAIL PROTECTED]
> web: http://www.centsys.co.za
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
