Hi, (and I don't know your name, so I'll call you "pal.")
Dear Pal, when you start Protel99SE ... before you click on the icon, try
holding down the CTRL button. Hope this helps.
-----------------------------------------
Please make note of phone number changes
-----------------------------------------
John R. Lemburg, Sr. Hardware Engineer
Avistar Systems, Inc., Madison Building
15851 Dallas Parkway,
Suite #600 Addison, TX 75001
Direct 214-561-8623, Fax 214-561-????
[EMAIL PROTECTED]
visit our web site! www.avistar.com
-----------------------------------------
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 07, 2001 9:01 AM
To: Protel EDA Forum
Subject: Re: [PEDA] Locked out of ProtelSE99
In a message dated 6/7/01 9:57:41 AM Eastern Daylight Time,
[EMAIL PROTECTED]
writes:
> Yesterday I added a new printer. All went well and I was
able to
> print (in another windows program). Now Protel won't open. I get the
> error message "invalid printer" when I try to load a schematic. I
press
> OK and protel locks up. I've tried Other dbb. but get the same
results.
> Try to use the repair data base and protel closes with out warning.
Can
> anyone out there steer me in the right direction. Also I have assumed
that
> the adding of the new printer is what caused the problem. I could be
wrong.
>
You might have to reinstall or "repair" Protel itself. I recall some
similar
sort of problem where installing another program replaces a DLL used by
Protel, and the internal spreadsheet would no longer work. If you've
done
extensive customization, others on this list can tell you about files
that
you may wish to back up before reinstalling Protel.
Steve Hendrix
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
