Hello all,
I've got a problem:
There's a dialog in the PCBprint menu, "Tools"|"Preferences..."|"Colors &
Gray scales", where colors for printout can be changed. This worked great,
until some weeks ago it was no longer possible to change the colors. If I
right-click on any color, nothing happens... I can't remember to have
changed anything in the configuration.
However, gray scales worked (were able to be modified).
The machine used to be a (rather old) dual P-MMX200MHz with NT4.0SP6a,
Protel 99SE with SP5 installed. An older Matrox Millenium (G200) as graphics
card.
Now I have a brand-new Dell Machine (dual PIII-1GHz) with W2K/SP1 and
Protel99SE/SP6, and the problem persists from the first moment. Again a
Matrox Millenium (G445 Max dh)
With another machine (K6-III, 450MHz, NT4.0SP6a, Protel99SE/SP5..6)
everything works, even with the same files. PCBprint colors seem to be, like
all other preferences, system specific, not document specific.
Anyone who can help me?
regards,
Heiko
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
