Dear. I use a ublox EVK-6T for RTKlib test.
However, the RTKNAVI main screen shows nothing and no log & out files. Here is a screen capture file (214M) : https://files.ucloud.com/pf/D49294_6848656_818566 (Valid Until 2012-12-31) This is what I did. [00:00~00:37] I set the Output of EVK-6T from NMEA to UBX->the console stops/maybe it receives nothing : ( [00:38~00:54] Anyway, I run a RTKNAVI and set the option as "Single" positioning mode [00:55~01:09] Input is serial and Format is u-blox [01:10~01:07] Output is file with NMEA format [01:08~01:25] Log is also file [01:06~01:26] Press the Start button the upper boxes turn into green and only the last green box blink [01:27~02:03] The output and log files are empty [02:04~02:29] Press the RTK Monitor button [02:30~02:35] Change the main display option but nothing displayed. [02:36~02:45] For the last step, I stop the RTKNAVI and open the output file -> nothing recorded. What's the problem? if u know any thing, plz comment me. -- View this message in context: http://open-source-gps-related-discussion-and-support.1099874.n2.nabble.com/Q-ublox-EVK-6T-setting-for-RTKlib-video-capture-included-tp7146506p7146506.html Sent from the Open Source GPS-related discussion and support mailing list archive at Nabble.com. _______________________________________________ This message is sent to you from [email protected] mailing list. Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your subscription For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS
