Here is the data of the test over 10 Minutes: https://www.dropbox.com/s/zjuoeqsw45f058f/rtklib.zip
The .txt files are the raw data streams with the ubx / rtcm data and i also added the converted .pos / .nav files. And what i didn't write is that i use the windows version. I have used the linux console version earlier and i got the same results. I also took a screenshot on how the window looks during the test, which i forgot to add in the last message: https://www.dropbox.com/s/pkjdekltsqhe725/rtknav.png I access the base station computer via ssh on a linux laptop, which sends the data via UDP to a specified IP. Because RTKLIB only supports TCP, I use netcat to forward that data via TCP to my windows Laptop which i then take outside with the Rover GPS attached to it. But all that works with no problems. And i have never heard of valgrind, but i looked it up and should be able to test with it. I only interpreted the debug data i had together with the source-code, so the problem might be somewhere else, but i am pretty sure that it's there. -- View this message in context: http://open-source-gps-related-discussion-and-support.1099874.n2.nabble.com/I-always-get-no-double-differenced-residual-message-with-RTKLIB-tp7572550p7572552.html Sent from the Open Source GPS-related discussion and support mailing list archive at Nabble.com. _______________________________________________ This message is sent to you from [email protected] mailing list. Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your subscription For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS
