The basic requirements for a base station are 1) a good location, 2) reliable power and 3) reliable networking. I suspect ham relay towers are in excellent locations and they have solved the power issues. They probably don't have great networking bandwidth. You could handle a limited number of connections on a local caster, but the main "hub" caster should have a high bandwidth connection and probably reside somewhere back in town.
My rPI fits into a weatherproof box and is powered over the ethernet cable (POE). I'm using a Trmble compact dome antenna mounted on a 3/4" pipe. Rather than placing the antenna on a tall, wiggling tower, I'm hammering the pipe deep into the ground. The earth is a much more stable platform for precise positioning. I'm not sure what voltages are available in the ham towers. The rPi needs a clean 5V. I'm using a remote POE adapter over a 100m ethernet cable. If you have 110Vac or 12V nearby, you could use a simple USB charger instead. John Morris Menlo Park, CA ________________________________________ From: [email protected] <[email protected]> on behalf of John Morris <[email protected]> Sent: Monday, May 12, 2014 11:17 AM To: Open Source GPS-related discussion and support Subject: Re: [FOSS-GPS] Amateur NTRIP casters I'm setting up a small ntrip caster which runs on a RaspberryPi. It takes data from an Lea-Xt and can broadcast both raw and RTCM 3.1 messages. It doesn't support all the variations of Ntrip - just Ntrip 2 over tcp with simple password protection - but that is all I need for my purposes. Over all, I'd like to set up a series of local, community base stations, and then do a mobile app for short static positions. I haven't started the mobile app yet, but the base station software is close to being usable. I'd be interested in collaborating. John Morris Menlo Park, CA ________________________________________ From: [email protected] <[email protected]> on behalf of Danny Miller <[email protected]> Sent: Thursday, May 08, 2014 1:25 PM To: [email protected] Subject: [FOSS-GPS] Amateur NTRIP casters I have seen some things about NTRIP casters as references. They're supposed to be useful, but few and far between. Long-distance baselines are likely. I was talking to a local ham radio group the other day, which was into setting up stations... repeaters I think, as a grassroots public service. I think there was some sort of internet connection involved there. Would it be useful to use something like LEA-6T or NV08-C L1 stuff as an amateur, but more likely to be local (low baseline), NTRIP caster? It really doesn't seem difficult to add this functionality to the sort of physical stations they do. Is it useful for accuracy? Is there an existing framework by which amateur, local NTRIP data could be located and accessed? Danny _______________________________________________ This message is sent to you from [email protected] mailing list. Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your subscription For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS _______________________________________________ This message is sent to you from [email protected] mailing list. Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your subscription For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS
_______________________________________________ This message is sent to you from [email protected] mailing list. Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your subscription For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS
