Hi bjorn.spockeli ! <<< -------------------------------------------- Em qua, 15/10/14, bjorn.spockeli <[email protected]> escreveu: Assunto: [FOSS-GPS] RTKLIB Para: [email protected] Data: Quarta-feira, 15 de Outubro de 2014, 13:01 Im trying to run rtkrcv under linux, but i've run into some problems and it would be great if anyone of you could point out what im doing wrong. My setup is a ublox lea-6t reciever with a ANN-MS-0-005 Antenna connected to the usbport of my desktop computer (running Linux Mint 17) with a Prolific PL2303 USB-RS232 Converter.
The setup works perfectly with RTKNAVI ver.2.4.2 on windows. >>> i suppose you set rxm_raw and rxm_sfrb messages as it works under rtknavi. Please check your configuration file: # standalone. for NTRIP set type and path. yours are off inpstr1-type =serial # serial inpstr2-type =off # off || ntripcli inpstr3-type =off # off || ntripcli # ublox baudrate =ttyACM0:57600:8:n:1:off i guess inpstr1-path =ttyUSB0:57600:8:n:1:off inpstr2-path = inpstr3-path = # here path and permissions misc-startcmd =./rtkstart.sh misc-stopcmd =./rtkshut.sh file-cmdfile1 =../../../data/ubx_raw_1hz.cmd file-cmdfile2 =../../../data/ubx_raw_1hz.cmd i hope it helps. regards, julio menezes _______________________________________________ This message is sent to you from [email protected] mailing list. Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your subscription For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS
