Beware that standard baud rates (9600) can easily end up in buffer overrun due to more data every second than 9600 baud can handle. And at first, with only a few satellites acquired, the data may be intact, then have problems once many sats are acquired and more data needs to be sent.

You need to configure the NV08C for 57600 baud and "save" the config. I'm not sure if that requires the battery to be in place or not. But you want this config to stay persistent because you're gonna have your FTDI chip on a fixed configuration for 57600.



Danny

On 1/15/2015 4:14 AM, [email protected] wrote:
If in doubt read all the documentation!
Beware though the USB is via FTDI serial to usb converter. You must therefore have the correct drivers installed. The system should then identify the two serial ports correctly. Note that unlike usb interface you must select the correct baud rate parity and stop bits or you will not communicate. Beware also the parity is ODD!
Regards Anthony

Sent from my HTC

----- Reply message -----
From: "cocute" <[email protected]>
To: <[email protected]>
Subject: [FOSS-GPS] How to configure RTKLIB android with NV08C-CSM chip?
Date: Wed, Jan 14, 2015 21:04

I think problem is,
NV08C-CSM have two COM ports:
COM 11 for nemea
COM 12 for raw
in rtklib pc versión i choose COM12  and all OK,
But in android version only select USB,
and i think it connect to COM11 Nmea
i dont now what is parameter to select COM12 ¿?



--
View this message in 
context:http://open-source-gps-related-discussion-and-support.1099874.n2.nabble.com/How-to-configure-RTKLIB-android-with-NV08C-CSM-chip-tp7573099p7573101.html
Sent from the Open Source GPS-related discussion and support mailing list 
archive at Nabble.com.
_______________________________________________
This message is sent to you from [email protected] mailing list.
Visithttp://lists.osgeo.org/mailman/listinfo/foss-gps  to manage your 
subscription
For more information, checkhttp://wiki.osgeo.org/wiki/FOSS-GPS


_______________________________________________
This message is sent to you from [email protected] mailing list.
Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your 
subscription
For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS

_______________________________________________
This message is sent to you from [email protected] mailing list.
Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your 
subscription
For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS

Reply via email to