Good day Henri I have built a gps unit that we use in drones, the units can be setup as either base or rover and also stores rinex data for post processing
The unit weigh 137 grams and we have tested them for navigating of the drones as well especially for landing purposes We are testing one in a 4 seater aircraft tomorrow where we will be hooking it up to the camera and will be storing the photo center positions The camera will send a signal to the gps and the we write an annotation in the rinex file for identification We will fly 2 flights over the same area, 1 with rtk and the other without rtk to see what the differences would be If you are interested please drop me an email Regards Anton Sent via my BlackBerry -----Original Message----- From: henri Debise <[email protected]> Sender: "FOSS-GPS" <[email protected]>Date: Thu, 26 Nov 2015 18:31:14 To: [email protected]<[email protected]> Reply-To: henri Debise <[email protected]>, Open Source GPS-related discussion and support <[email protected]> Subject: [FOSS-GPS] first steps with RTK and RTKPOST _______________________________________________ This message is sent to you from [email protected] mailing list. Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your subscription For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS _______________________________________________ This message is sent to you from [email protected] mailing list. Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your subscription For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS
