You could try a virtual com port solution eg Com0com, or tcpip transfer
if the collection software acepts it.
Regards
Anthony
On 09/09/2016 17:55, Dhirendra Singh wrote:
I use arcpad GPS data collection software which looks for a NMEA GPS
device on a serial COM port in windows.
I can take final RTK output as a NMEA text file from RTKNAVI output
window. But*_ How can I get real time RTK position coordinates in the
GIS software from RTKNAVI which is my ultimate objective of using
RTKLIB ? _*One com port of the rover receiver is already used/engaged
in RTKNAVI input. If we get final RTK NMEA output on a serial port
that also gets engaged & can't be used in the GIS software. So what is
the solution to the problem while using RTKLIB for real time RTK
position coordinates ? I have used split serial port also to free a
serial port. I have tried many options but failed to get real time
final RTK output directly from RTKNAVI to the GIS software which I use
in the field to get GPS position coordinates. Can anybody help with
this issue ?
_______________________________________________
This message is sent to you from FOSS-GPS@lists.osgeo.org mailing list.
Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your
subscription
For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS
_______________________________________________
This message is sent to you from FOSS-GPS@lists.osgeo.org mailing list.
Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your
subscription
For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS
