Re: [FOSS-GPS] Online NTRIP caster

[David Kelley]

Ilya I have now successfully connected up three streams from my own development PC this morning running a SNIP Caster in its PUSH-Out mode  (Hemisphere, uBlox, and Trimble devices running RTCM3, RTCM2 and uBlox proprietary formats) Here are the entries from your caster table at  http://95.85.53.176:2101/ STR;SCSCtest;LosA, Calif;RTCM 3.0;;2;GPS + GLO;SNIP;AFG;34.13;-117.83;0;0;simpleNTRIP;none;B;N;0;connectionTesting; STR;uBlox6;;RTCM 2.0;;1;GPS;SNIP;AFG;34.13;-117.83;0;0;sNTRIP;none;B;N;0;raw ublox 6 data stream; STR;rtcm2tests;;;;0;;;AFG;0.00;0.00;0;0;;;B;N;0;; If it helps, I can get these cross posted at the RTK2go.com site as well (or any others as you may need them), but I see you have the ASZU site which is also cross posted there.  FYI, there is nothing special about the ASZU site, it just happens to be close to our local offices AND is carried by several major NTRIP networks, AND the cold start behavior of the SNIP software links to it from our open caster at ntrip.use-snip.com - as a result people see it alot.  It makes a good base station site for comparing the milliseconds delay observed with multiple remote-relay uses. In using the youcors.com tool... So far only confusion I had was that of a new user, will keep these up for a day or two but the links will go up and down as I keep tinkering with code tinkering at this end.  Will leave it up overnight  (US time zone).  I will load up some clients to read that data and validate end to end checking overnight starting tonight.  A few initial observations:  Allow "-" and "_" in the mountPt names and be aware that many deployments will want more then 10 chars, (I think the std allows 32) Why does the creation of a mountPt reservation (my own term) required a "user" to be entered and how is this used? Carefully consider what to do when more than one party want the same mountPt name Take a good look at the Caster that GEO++ offers, unlike our SNIP tool or most other Casters, then have rather a nice web GUI. Consider allowing "Private" mountPt to also be "hidden" Please consider adding addition format style,  a lot of cost sensitive folks want things like uBlox binary and not just RTCM flavors.  You might use the same list you see in this table (as there is not any official RTCM set of phrases) https://www.use-snip.com/kb/knowledge-base/supported-caster-data-formats/  I do not understand how to edit a mountPt reservation once it is created, it takes the user back the creation pages when I would have expect to fill in or edit the caster table entry details again.  I like the way the Google map shows a "3" for the test cases where all three have the same Lat-Lon in the Caster table entry.  I understand you are stuck with that unless you parse the actual RTCM (a major effort), but the visual detail good good to me.  I have not had a moment to try the client side of this.  Everything I have sent into it was at 1H (and seems to work fine), may try other rates soon as well.  Regards,  David Kelley On 4/5/2017 7:00 PM, ivial98 wrote: Hi, David I'm huge fan of SNIP, you are create great piece of software. Your help with testing will be very important for me. My testing capabilities are limited by luck of available RTK streams. Best regards, Ilya

_______________________________________________
This message is sent to you from FOSS-GPS@lists.osgeo.org mailing list.
Visit https://lists.osgeo.org/mailman/listinfo/foss-gps to manage your 
subscription
For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS