Hi folks, I have been playing with the RTKlib packages for a few months now. Current setup is 2 CSG M8T receivers. Each connected to a Raspberry Pi Zero W. The pi run str2str that I compiled on the pi. These connect to RTKNAVI on my laptop without issue, all over wifi. Have 2 cell phones ready to handle the data connection so I can take it out into the wild! No problems at this point.
I want to use RTKRCV which I have compiled on a linux machine. Am able to make config changes but the tool is telling me to restart after I make a config change. Here is what I am doing: rtkrcv> help rtkrcv ver.2.4.2 start : start rtk server stop : stop rtk server restart : restart rtk sever solution [cycle] : show solution status [cycle] : show rtk status satellite [-n] [cycle]: show satellite status observ [-n] [cycle] : show observation data navidata [cycle] : show navigation data stream [cycle] : show stream status error : show error/warning messages option [opt] : show option(s) set opt [val] : set option load [file] : load options from file save [file] : save options to file log [file|off] : start/stop log to file help|? [path] : print help exit : exit and logout console shutdown : shutdown rtk server !command [arg...]: execute command in shellrtkrcv> restart sh: 1: ./rtkstart.sh: not foundcommand exec error: ./rtkstart.sh (32512)rtk server start errorrtkrcv> start sh: 1: ./rtkstart.sh: not foundcommand exec error: ./rtkstart.sh (32512)rtk server start errorrtkrcv> stop rtk server stoprtkrcv> start sh: 1: ./rtkstart.sh: not foundcommand exec error: ./rtkstart.sh (32512)rtk server start errorrtkrcv> It cant seem to find the start or restart commands....any wisdom? I only did the compile of rtkrcv and no others.
_______________________________________________ This message is sent to you from FOSS-GPS@lists.osgeo.org mailing list. Visit https://lists.osgeo.org/mailman/listinfo/foss-gps to manage your subscription For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS
