On Dec 10, 2007 7:41 PM, Fajar Priyanto <[EMAIL PROTECTED]> wrote: > Hello all, > I'm setting up LSTP5 with Feisty 64bit. > All is ok. The clients can boot. > > I then connect and setup an Epson LX300 dot-matrix printer on client1 using an > IBM Compatible printer driver. Hi Fajar,
If you are using the printer for all the clients including server, then It would be better to setup the printer in the server. You don't have to configure each and every client. The printer is automatically loaded in each and every client. As far as setting printer in individual client, It may be difficult to track individual machine, due to dhcp, but if fixed IP is given or traced by MAC it is possible as you described in lts.conf, It must work But I always perfer configuring in server. >From client1 I can print to it OK. > But, I cannot print to it from any other client or the server, with error: > "Network host is busy will retry in 30 seconds" > > This is my lts.conf: > [00:19:66:16:23:93] <-- the mac address of client1 > PRINTER_0_TYPE=P > PRINTER_0_DEVICE=/dev/lp0 > > In adding the printer, I use: > - Network Printer (Jet direct) > - Put the ip address of client1 > - And the port 9100 > > Is there any step that I miss? > There's no any firewall in the client and server. > I build the client environment using --arch i386 because the clients are 32bit > PC. > Thank you very much. > -- > Fajar Priyanto | Reg'd Linux User #327841 | Linux tutorial > http://linux2.arinet.org > 19:10:30 up 26 min, 2.6.22-14-generic GNU/Linux > Let's use OpenOffice. http://www.openoffice.org > The real challenge of teaching is getting your students motivated to learn. > -- daya, "A candle doesn't lose anything by lighting another" --~--~---------~--~----~------------~-------~--~----~ FOSS Nepal mailing list: [email protected] http://groups.google.com/group/foss-nepal To unsubscribe, e-mail: [EMAIL PROTECTED] Community website: http://www.fossnepal.org/ -~----------~----~----~----~------~----~------~--~---
