I have been using this configuration to connect to UTL CDMA through a USB CDMA dongle.
[Dialer Defaults] Modem = /dev/ttyUSB0 Baud = 230400 Init1 = ATE0 Init3 = AT+CTA=0 Init4 = ATEOV1 Init5 = AT Init6 = ATS0=0 ISDN = 0 Modem Type = Analog Modem Phone = #777 Username = [email protected] Password = number Stupid Mode = 1 New PPPD = yes On Sat, Mar 28, 2009 at 8:32 AM, Abhudaya Sagar <[email protected]>wrote: > Personal computer ko lagi pani yo configuration le kam garcha or we have to > write/edit else in wvdial.conf fle > confusing. > On 3/27/09, Bijay Rai <[email protected]> wrote: >> >> Tushar, >> >> Does this config work for a UTL RUIM card plugged into CDMA 1x dongle? >> >> [Dialer Defaults] >>> Modem = /dev/ttyACM0 >>> Baud = 460800 >>> Init1 = ATZ >>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 >>> +FCLASS=0 >>> ISDN = 0 >>> Modem Type = USB Modem >>> Phone = #777 >>> Username = (your telephone number) >>> Password = (your telephone number) >>> stupid mode = 1 >>> >> >> -- >> Bijay >> > > > > -- > Mr. Abhudaya Sagar Kshetri (ASK?) > Url: www.sagarkshetri.com.np > email:[email protected] <email%[email protected]> > > > > > -- Bibek Shrestha bibekshrestha at gmail dot com --~--~---------~--~----~------------~-------~--~----~ FOSS Nepal mailing list: [email protected] http://groups.google.com/group/foss-nepal To unsubscribe, e-mail: [email protected] Community website: http://www.fossnepal.org/ -~----------~----~----~----~------~----~------~--~---
