Now a days i feel so much bhagyamani over these topic as kehi chin ko dimag manthan ra thread studyle internet easily connect bhairako cha. Thankx to all hai. My happiness are no bound as i got sucess to write this response thread from my MSI laptop with UBUNTU soul. Some problem i found and i solved is: a. below configuration never made me frustrate to access internet with cdma but i don't know what are they saying, hope i will know that soon
[Dialer Defaults] Modem = /dev/ttyUSB0 Baud = 230400 Init1 = ATE0 Init3 = AT+CTA=0 Init4 = ATEOV1 Init5 = AT Init6 = ATS0=0 ISDN = 0 Modem Type = Analog Modem Phone = #777 Username = [email protected] Password = number Stupid Mode = 1 New PPPD = yes b. i failed to dail with wvdialconf to better to try wvdial only c. pppd rights error -> sudo chmod 777 pppd -R d. now use -> sudo wvdial now enjoy the connection jai foss feri arko beer On May 21, 8:58 pm, Bibek Shrestha <[email protected]> wrote: > You can also find guide related to Multimedia on > > https://help.ubuntu.com/community/Multimedia > and our Own Ubuntu-np wiki athttp://wiki.ubuntu.org.np/MultimediaGuide > > Please help improve the contents at the wiki. > > Cheers > > On Thu, May 21, 2009 at 3:52 PM, Abhudaya Sagar <[email protected]>wrote: > > > > > what a guide. > > gr8. > > > On 5/21/09, Laxmi Khatiwada <[email protected]> wrote: > > >> On Wed, May 20, 2009 at 10:50 PM, SaanSoft <[email protected]>wrote: > > >>> I am now using the Windows Vista and the UBUNTU EDITION distributed by > >>> the Foss Nepal Community. I have tried my best to contact for > >>> troubleshooting, but …..no response follows. So plz help me in these > >>> topics.: > > >>> 1. I am using the SRT 2008 Wireless CDMA data card for internet > >>> connection. It does not works in UBUNTU. > > >> Using CDMA USB Wireless Modem with NTC Sky Phone R-UIM in Ubuntu! > > >> Things needed: > >> CDMA USB Wireless Modem- ~3000 rupees. > >> R-UIM Card from NTC ~1200 rupees. > >> Ubuntu 7.10 (Not sure about other versions!) > > >> Just Put the RUIM inside the wireless modem and plug it to the USB Port. > > >> 1. Put in the RUIM into the device and insert as USB. > > >> 2. Now you need to edit the file called /etc/wvdial.conf by the command > >> ’sudo nano /etc/wvdial.conf’ > >> This is my setting: > >> ________________________________ > >> [Dialer Defaults] > >> In it1 = ATZ > >> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > >> Modem Type = USB Modem > >> Baud = 460800 > >> New PPPD = yes > >> Modem = /dev/ttyACM0 > >> ISDN = 0 > >> Phone = #777 > >> Password = 9741147061 > >> Username = 9741147061 > >> ______________________________ > >> make sure that the password and username is the same.. that is.. your > >> phone number! > >> save the file using Ctrl+X > > >> 3. Now edit the file /etc/network/interfaces by the command ’sudo nano > >> /etc/network/interfaces’ > >> _______________________________ > >> auto lo > >> iface lo inet loopback > > >> iface ppp0 inet ppp > >> provider ppp0 > >> gateway 10.64.64.64 > >> _______________________________ > >> now save the file again using Ctrl+X > > >> 4. Now the file called /etc/resolv.conf is edited using ’sudo nano > >> /etc/resolv.conf > >> ________________________________ > >> nameserver 202.70.64.5 > >> nameserver 202.70.64.15 > >> ________________________________ > >> save again using Ctrl+X > > >> 5. [image: :)] You are done.. now you are just so close to surfing… wait > >> for a second now.. now restart your machine… > >> 6. In the terminal type : ‘wvdial’ > >> you will now get: > >> ________________________________________ > >> ab...@lappy:~$ wvdial > >> WvDial<*1>: WvDial: Internet dialer version 1.56 > >> WvModem<*1>: Cannot get information for serial port. > >> WvDial<*1>: Initializing modem. > >> WvDial<*1>: Sending: ATZ > >> WvDial Modem<*1>: ATZ > >> WvDial Modem<*1>: OK > >> WvDial<*1>: Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > >> WvDial Modem<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > >> WvDial Modem<*1>: OK > >> WvDial<*1>: Modem initialized. > >> WvDial<*1>: Sending: ATDT#777 > >> WvDial<*1>: Waiting for carrier. > >> WvDial Modem<*1>: ATDT#777 > >> WvDial Modem<*1>: CONNECT > >> WvDial<*1>: Carrier detected. Waiting for prompt. > >> WvDial<Notice>: Don’t know what to do! Starting pppd and hoping for > >> the best. > >> WvDial<Notice>: Starting pppd at Fri Apr 18 10:55:37 2008 > >> WvDial<Err>: Warning: Could not modify /etc/ppp/pap-secrets: > >> Permission denied > >> WvDial<Err>: –> PAP (Password Authentication Protocol) may be flaky. > >> WvDial<Err>: Warning: Could not modify /etc/ppp/chap-secrets: > >> Permission denied > >> WvDial<Err>: –> CHAP (Challenge Handshake) may be flaky. > >> WvDial<Notice>: Pid of pppd: 6261 > >> WvDial<*1>: Using interface ppp0 > >> WvDial<*1>: local IP address 10.0.0.165 > >> WvDial<*1>: remote IP address 10.64.64.64 > >> WvDial<*1>: primary DNS address 202.70.64.5 > >> WvDial<*1>: secondary DNS address 202.70.64.15 > > >>> 2. The multimedia software in the UBUNTU does not works. (Only > >>> video is seen, not sound, except in VLC Media player) > > >> Ubuntu Intrepid Ibex 8.10, > >> Ubuntu Hardy Heron LTS 8.04 > > >> Open Synaptic (System -> Administration -> Synaptic Package Manager). In > >> Settings -> Repositories, make sure you have a "multiverse" repository > >> activated. > > >> Search for vlc and install it. You should also install vlc-plugin-esd, > >> mozilla-plugin-vlc (and libdvdcss2). > >> Command line way > > >> You need to check that a "multiverse" mirror is listed in your > >> /etc/apt/sources.list. > > >> % sudo apt-get update > >> % sudo apt-get install vlc vlc-plugin-esd mozilla-plugin-vlc > > >> Ubuntu Gutsy Gibbon 7.10, > >> Ubuntu Feisty Fawn 7.04 Graphical way > > >> Open Synaptic (System -> Administration -> Synaptic Package Manager). In > >> Settings -> Repositories, make sure you have a "universe" repository > >> activated. > > >> Search for vlc and install it. You should also install vlc-plugin-esd, > >> mozilla-plugin-vlc (and libdvdcss2). > >> Command line way > > >> You need to check that a "universe" mirror is listed in your > >> /etc/apt/sources.list. > > >> % sudo apt-get update > >> % sudo apt-get install vlc vlc-plugin-esd mozilla-plugin-vlc > > >> Ubuntu Dapper Drake LTS 6.06 > > >> Dapper will be supported until June 2009 by Canonical. However, its VLC > >> version is very old, so use our packages to get the latest version. > > >> Be sure to have a universe repository enabled. Type these commands in a > >> terminal: > > >> echo "debftp://ftp.videolan.org/pub/videolan/ubuntudapper universe" > > >> /etc/apt/sources.list.d/vlc.list > > >> sudo apt-get update > >> sudo apt-get install vlc vlc-plugin-esd mozilla-plugin-vlc libdvdcss2 > > >> 3. My Sound card does not works with my open source. > > >> sudo apt-get install module-assistant > >> sudo m-a update > >> sudo m-a prepare > >> sudo m-a a-i alsa > > >> Reboot computer and it's perfect > > >> TRY IT AND Share if any problem > > >>> PLZ HELP ME WITH THESE THREE TOPICS. > > > -- > > Mr. Abhudaya Sagar Kshetri (ASK?) > > Url:www.sagarkshetri.com.np > > email:[email protected] <email%[email protected]> > > -- > Bibek Shrestha > bibekshrestha at gmail dot com --~--~---------~--~----~------------~-------~--~----~ FOSS Nepal mailing list: [email protected] http://groups.google.com/group/foss-nepal To unsubscribe, e-mail: [email protected] Community website: http://www.fossnepal.org/ -~----------~----~----~----~------~----~------~--~---
