Does that configuration works for LST-2500 model utl phone? On Sep 3, 8:12 pm, Kishan <[email protected]> wrote: > Anil Kumal wrote: > > hi, > > > Can anyone plz tell me how to configure Standard 33600 bps modem in > > Linux mint? > > > In windows i usually use dial up connection setting to connect > > internet. > > I use externel modem provided by UTL to connect internet from cdma UTL > > phone. > > > Thank you. > > Hi i will provide a code to placed in file /etc/wvdial.conf then type > sudo wvdial in trminal then u will be connected to net > > the code to be inserted is with steps r -: > > (u must have wvdial if not install wvdial ) > > 1.Goto- Terminal. > > 2.Type: sudo gedit /etc/wvdial.conf > and then enter the password. > > 3.The wvdial.conf opens… now add the following lines: > [Fill all below bold instructions in new wvdial] > > [Dialer Defaults] > Modem = /dev/ttyUSB0 > Baud = 230400 > Init1 = ATE0 > Init3 = AT+CTA=0 > Init4 = ATEOV1 > Init5 = AT > Init6 = ATS0=0 > ISDN = 0 > Modem Type = Analog Modem > Phone = #777 > Username = Usern... > <http://groups.google.com/groups/unlock?_done=/group/foss-ratnanagar/b...>@utlnepal.com > > Password = Password > New PPPD = yes > Stupid Mode = 1 > > 4.Then save the document by clicking save tab appear above the task > bar in wvdial > > 5.Again goto Terminal and type sudo wvdial then press enter > > 6.Now your are success. --~--~---------~--~----~------------~-------~--~----~ FOSS Nepal mailing list: [email protected] http://groups.google.com/group/foss-nepal To unsubscribe, e-mail: [email protected]
Community website: http://www.fossnepal.org/ -~----------~----~----~----~------~----~------~--~---
